Sectional garage doors

Sectional garage doors are ideal for garage spaces in residential buildings. They are made up of panels that are raised on guides and stop below the ceiling. This model of garage door allows for full utilization of the garage space.

They are made of double galvanized steel sheet, with panels in different designs, with horizontal lines, rough or smooth panels depending on the color, with thin or wide grooves depending on the type of panel. They are characterized by strength, thermal insulation and high resistance to weather conditions.

We offer standard colors such as white RAL 9010, gray RAL 9006, brown RAL 8014 or anthracite RAL 7016, as well as two shades of wood imitation - light (golden oak) or dark (walnut). Also, at the request of the investor, it is possible to paint the outer surface of the panel in any color according to the RAL color chart, and it is also possible to install additional locks or handles, windows or ventilation openings.

Door type FLEXI

FLEXI sectional doors are characterized by a high level of performance quality and durability. They are made of thermally insulated panels, finished painted, filled with polyurethane, standard horizontal grid, guides are galvanized, resistant to weather conditions. These doors are intended for private garages within residential buildings. Extremely solid construction of panels and fittings ensures long-term use.

We produce FLEXI type doors up to 3600 mm high and up to 6000 mm wide. Upon request or as needed, thermoacrylic windows, ventilation grilles, additional locks or handles can be installed in the doors. Along with the doors, we offer the corresponding automation - two types of motors that differ in power: 600N and 1000N, remote controls of different security levels and appearance, and signaling and safety equipment (flashlights, photocells, etc.).

Door type WOODLINE

For doors with high aesthetic criteria or doors that need to be integrated into wooden architecture (cottages, etc.), we offer panels in imitation wood. We offer 2 basic imitation wood finishes: light (golden oak) and dark (walnut).

Garage roller doors

Garage roller doors are made up of slats, filled with polyurethane and insulated with a layer of painted aluminum, which are lifted along guides and wound into a roll placed in a container located immediately above the door opening.

These doors take up very little space and are the choice when the interior and ceiling of the garage need to remain free. All elements are resistant to all weather conditions, rust and corrosion. According to the request, slats for light or ventilation can be installed. With these doors, we offer a side motor or a central motor in a tube, with the corresponding set of remote controls and photocells, as well as signaling and safety equipment.

Door type FULL VISION

Garage roller doors are made up of slats, filled with polyurethane and insulated with a layer of painted aluminum, which are lifted along guides and wound into a roll placed in a container located immediately above the door opening.

These doors take up very little space and are the choice when the interior and ceiling of the garage need to remain free. All elements are resistant to all weather conditions, rust and corrosion. According to the request, slats for light or ventilation can be installed. With these doors, we offer a side motor or a central motor in a tube, with the corresponding set of remote controls and photocells, as well as signaling and safety equipment.

Type MEGALINE door

MEGALINE industrial doors are sectional doors intended for large industrial-scale openings (halls, hangars, car repair shops, warehouses, workshops).

They are made of panels with both sides galvanized and finished with a 0.4 mm thick sheet and a 40 mm thick polyurethane filling.

The doors have a modern design, and with their standard color palette they will fit into any architectural structure. Depending on the door dimensions and weight, we offer the appropriate industrial side automation.

Door book

Book doors represent a wide change in the protection of industrial openings. The shell of these doors is made of insulated panels of varying thickness, depending on the dimensions, which are assembled on one or both sides.

Numerous technical and aesthetic solutions are available in order to adapt each door to the needs of the investor and thereby satisfy different requirements.

Roller shutter doors and grilles

Roller shutters have a variety of applications, and are most commonly used in shopping malls, galleries, jewelry stores, and similar facilities where product visibility is desired, as well as protection of the facility itself.

Doors can be made of galvanized mesh tubular profiles connected by strips, and solid or micro-perforated galvanized slats.

High-speed SPEED-ROLL door

They are opened/closed by winding the PVC sheath into a roll held by a roller attached to the wall. The doors regulate the flow of cold and warm air, dust, smoke, noise, insects, etc. They take up very little space and have a particularly modern design and fast operation (lifting speed 0.6-0.8m/sec). The PVC sheath is available in several standard colors.

Safety is ensured by photocells and an obstacle-sensitive edge with the possibility of different types of control. These doors are mainly used in the interior of shops, food industries or shopping malls where it is necessary to separate the sales area from the storage area, but also to ensure fast internal communication between the storage and sales area.

SPEED-PACK high-speed doors

Quick-pack PVC door, made of galvanized steel frame with a vertical strip that lifts the PVC door skin and simultaneously folds the door into sections.

Doors regulate the flow and influence of cold and warm air, dust, smoke, noise, insects, etc. from the outside to the inside of the hall/storage space and are most often installed alongside sectional doors to ensure faster flow of goods according to the specific logistical requirements of the facility.

The PVC casing is available in several standard colors. They take up little space and have a particularly modern design and fast operation (lifting speed 0.6-0.8m/sec). Safety of operation is ensured by photocells and an obstacle-sensitive edge with the possibility of different types of control.

SPEED-FLEX doors

SPEED-FLEX doors are the ideal solution for dividing internal industrial environments that require insulation and fast traffic flow. The door structure is made of galvanized stainless steel and a transparent flexible PVC sheath. This type of door is most often used in the pharmaceutical, food and automotive industries.

STRIPE industrial tapes

Industrial PVC strip curtains, made of transparent PVC strips of various dimensions, with overlapping strips for better insulation, with fixed or movable guide depending on requirements and dimensions. Used in industrial facilities where it is necessary to separate spaces for different purposes, but ensure constantly passable logistical communication between them.

All doors are automated according to their weight and dimensions and are CE certified according to EU regulations.